Tesla Charger Installation — Como

Tesla Charger Installation in Como, Done Right

Charging your Tesla from a standard GPO is slow, draws excessive current, and puts strain on older household wiring. Get a dedicated home charger installed by a licensed electrician who knows Como's housing stock.

  • Certified installation of Tesla Wall Connector and Gen 3 chargers
  • Load assessment on existing switchboards before any work begins
  • Compliant with AS/NZS 3000 wiring standards and AS/NZS 3112
  • Serving Como and surrounding Sutherland Shire suburbs

Why Como Homes Need a Dedicated Tesla Charging Circuit

Como sits on a peninsula between the Georges River and Port Hacking, and its housing stock reflects decades of owner-occupied families. A large share of homes were built between the 1950s and 1980s — many still running single-phase 63A or even 40A main fuses with ceramic fuse holders rather than modern circuit breakers. Plugging a Tesla into an existing 10A GPO in a garage or carport draws continuous load at or near the outlet's rated limit for hours, which accelerates wear on aged wiring and risks nuisance tripping or worse.

A properly sized dedicated circuit — typically a 32A single-phase circuit feeding a Tesla Wall Connector — charges a Model 3 Long Range at roughly 17 km of range per hour, compared to under 10 km on a standard outlet. For Como residents who commute via Tom Ugly's Bridge into Sutherland or Miranda for work, that overnight top-up makes a material difference to daily readiness.

Many Como properties also have detached garages, carports set back from the street, or split-level layouts where the switchboard is inside the house but the charging point needs to be outside or under the carport. Conduit routing, weatherproof outlet selection, and cable sizing for the run length all require a licensed electrician's assessment — not a plug-in adapter from a hardware store.

Voltie Electrical assesses your switchboard capacity, calculates the cable run, selects the correct Wall Connector mounting location, and handles the network registration so your Tesla app sees the charger correctly from day one.

Our Installation Process

What a Proper Tesla Charger Install Looks Like in Como

Every installation starts with a site inspection — not a phone quote. We check the switchboard for available capacity, measure the cable route from the board to your preferred mounting point, and confirm whether a single-phase 32A circuit is sufficient or whether a 7kW three-phase setup is appropriate for your property. Older Como homes on single-phase supply are well served by the Gen 3 Wall Connector; newer builds or those with solar + battery setups may benefit from three-phase if the metering supports it.

  • Switchboard capacity check and load calculation before quoting
  • Weatherproof IP-rated enclosures for exposed carport installations
  • Conduit run planned to avoid damage to established landscaping
  • Tesla Wall Connector commissioned and paired to your Tesla account
  • All work tested, tagged, and Certificate of Compliance issued
  • Meter box upgrades arranged with Ausgrid or Endeavour Energy where needed
What a Proper Tesla Charger Install Looks Like in Como
What we do

Tesla Charging Solutions We Install

Why choose us

Why Como Residents Choose Voltie Electrical

Licensed & Insured

All work performed by licensed electricians under NSW fair trading requirements. Certificate of Compliance issued on completion — required for your home insurer.

Switchboard-First Approach

We never skip the capacity assessment. Como's older single-phase boards can't always support a 32A charger without upgrades — we tell you upfront, not after the job starts.

Local Shire Availability

Based in the Sutherland Shire, we service Como and neighbouring suburbs including Jannali, Kirrawee, Sylvania, and Illawong without the travel surcharges of metro contractors.

Reviewed on Google

What Our Customers Say

Voltie Electrical installs Tesla chargers across Como and the Sutherland Shire. Here's what local homeowners have shared about their experience.

4.9
Based on 200+ reviews
FAQ

Tesla Charger Installation in Como — Common Questions

Many Como homes of that era have 40A or 63A single-phase mains and ceramic fuse boards. A 32A Tesla circuit adds significant continuous load. We'll assess the mains rating, the existing load profile, and the condition of the board before recommending whether a charger can be added directly or whether a board upgrade is needed first. In some cases a load-limiting device or a reduced 20A charging circuit can be a practical interim solution.

Ready to Charge Smarter in Como?

Stop relying on a standard power point for your Tesla. Book a site inspection and get an honest assessment of what your property needs — no obligation, no guesswork.

0495 100 030
Get in touch

Get a Quote for Tesla Charger Installation in Como

Tell us about your property — house type, approximate switchboard age, and where you'd like the charger mounted — and we'll come back to you with a clear scope and price.